Wall Cantilever Jib Cranes

The cantilevered jib crane is constructed in the shape of an upside down L and has two hinges attached to the jib’s weldment. The advantage of the cantilevered workstation jib crane is its great headroom (better hook lifting height). Use in bays, along walls or columns ofplants, or as a supplement to an overhead crane or monorailsystem.

Send Requirement :


Request a Quote  **Free

No registration, no credit cards required.


Top Brands and Manufacturers

Show All Hide

Manufacturer and Suppliers for Wall Cantilever Jib Cranes


Detailed Description for Wall Cantilever Jib Cranes

Wall Cantilever Jib Cranes

Provide hoist coverage and 200 degree rotation for individual use in bays, along walls, or columns of plants, or as a supplement to an overhead crane or monorail system. This jib has the advantage of providing maximum lift for the hoist, since it can be installed very close to the underside of the lowest ceiling obstruction. It is composed of a vertical mast mounted to 2 brackets on a wall or vertical building beam with a boom that cantilevers out, perpendicular from the wall at the top.

 

 
  • Capacities from 1/4 ton to 5 tons
  • Spans to 20'
  • Requires very little head room and exerts less force on the structure it is mounted to
  • Requires a structurally adequate wall or column to support the jib, and needs sufficient clearance above the boom

Features:

  • Low cost method of manipulating loads where lifting space can be limited to between 180 and 270 of rotation provided by a wall or column mounted jib crane and where repetitive lifts are not required.
  • Wall mounted jib cranes utilize existing structures for support which eliminates the need to increase floor obstructions by adding additional columns.
  • Costly foundations are not required.
  • Capacities are limited by the size of your existing walls or columns. (In some cases CraneWerks can reinforce existing structures for increased capacity)
  • Lighter loads can be handled with enclosed rail systems while heavier capacities require structural steel beams.
  • One of the largest disadvantages to the use of wall mounted jib cranes is the high cost of engineering needed to determine if the building structure that they are going to be attached to will support them.

Question And Answer

Get Prices

Answers to your queries


Buying Tip- See what like buyers had to say!



SUBMIT