Drop-In Anchors

Drop in anchors are suited for threaded drop in expansion anchors for use in flush mount applications in thick base materials. Drop in concrete anchors available in stainless steel (DIA), short (DIAS) or coil-thread (DIAC) versions. Minimum thread engagement should be equal to the formal diameter of the threaded insert.Length (mm) : 50, 100, 150 etc. Available in M6-M12

Send Requirement :


Request a Quote  **Free

No registration, no credit cards required.


Top Brands and Manufacturers

Show All Hide

Manufacturer and Suppliers for Drop-In Anchors


Detailed Description for Drop-In Anchors

About Drop in anchors

Drop-in anchors are internally threaded drop-in expansion anchors for use in flush-mount applications in solid base materials. Available in stainless steel (DIA), short (DIAS) or coil-thread (DIAC) versions. Minimum thread engagement should be equal to the nominal diameter of the threaded insert.

Key Features

  • Lipped edge (DIAS) eliminates need for precisely drilled hole depth
  • Available in coil-thread version for 1/2" and 3/4" coil-threaded rod
  • Short length (DIAS) enables shallow embedment to help avoid drilling into rebar or pre-stressed/post-tensioned cables
  • Short Drop-In anchors include a setting tool compatible with the anchor to ensure consistent installation

Installation

  1. Drill a hole in the base material using the appropriate diameter carbide drill bit as specified in the table. Drill the hole to the specified embedment depth plus 1/8" for flush mounting. Blow the hole clean using compressed air. Overhead installations need not be blown clean.
  2. Insert designated anchor into hole. Tap with hammer until flush against surface.
  3. Using the designated drop-in setting tool, drive expander plug toward the bottom of the anchor until shoulder of setting tool makes contact with the top of the anchor.

        


Question And Answer

Get Prices

Answers to your queries


Buying Tip- See what like buyers had to say!



SUBMIT