Short Description: Threaded Pins are solid alignment pins with a ground shank and a threaded end for a knob handle. Two locking balls hold the pin in place by spring force . The diameter of threaded pin is in between 6mm to 25mm.
Short Description: Drive pin or pin anchors are installed in pre-drilled holes with a hammer strike that drives a nail into the anchor body, extracting the anchor to form a fit tightly. These anchors secure light loads to masonry materials, it's diameter is in between 3/16'' to 1/4'' .
Short Description: Detent Ring Pins are also known as Hitch Pins, Quick Lock Pins, Cotter less Hitch Pins, Quick Release Pins, Quick Pins, Ball Lock Pins and Cotter less Quick Pins. Standard sizes are made by low carbon steel, zinc plated. These pins diameter are in between 6mm to 20mm, length Less than 20mm - More than 80mm, available in steel, stainless steel, etc. materials.
Short Description: Weld pins are designed with a long narrow shaft that is spot welded to a metal surface, primarily to fasten duct liner to metal ductwork, or other materials onto metal surfaces. The diameter of weld pin is in between 0.185'' to 0.335''.
Short Description: Comprising one of three parts in a clevis fastener system, clevis pins absorb lateral stress and rotate to allow freedom of movement for supported objects. Clevis pins are found in land, sea, and air vehicles, agricultural machinery, and construction applications. These pin's diagrams are like 1/4'',3/4'',5/8'' etc.
Short Description: A taper pin is a fastener used in mechanical engineering. They are steel rods with one end having a slightly larger diameter than the other. Standard inch-sized taper pins have a taper on diameter of 1:48 while metric ones have a taper of 1:50.
Short Description: Headpins are popular, basic items for making earrings, charm bracelets and many other jewellery projects. A headpin has a flat or ball-shaped head at the bottom to stop beads at the end of a pin. They are ideal for creating collections of beads that dangle down from a starting point.
Short Description: Toggle Pin that are very light in weight and are highly resistant to corrosion. Toggle Pins are manufactured using high grade raw material that is well tested on several quality parameters. It’s diameter is between 6mm to 28mm.
Short Description: A linchpin, also spelled linch pin, lynchpin, or lynch pin, is a fastener used to prevent a wheel or other part from sliding off the axle upon which it is riding. Securing implements onto the three-point hitch of a tractor is an example of application. Linchpins may also be used in place of an R-clip for securing hitch pins. The diameter of Linch Pins is between 30mm to 15mm.
Short Description: The ejector pins are used in injection moulds to eject the plastic components from the moulds. There are 2 types 1) plane ejector pins 2) step ejector pins. The material used are En-31 and HDS( hot die steel). Sizes are from dia 01 mm to 20 mm and length between 100mm to 600mm.
Short Description: The Brass Pins are made by using high quality raw materials. These pins are used to be applied in number of machines and automobiles. It has been resistance to corrosion. These pins have diameter between 70mm to 0.8mm, length between 6mm to 25mm, available in Natural, Nickel, Tin, Gold, Silver etc. materials, applicable in Construction industries, Oil and gas refineries etc.
Location: mumbaiRequest Quote | Contact Supplier
Location: JammnagarRequest Quote | Contact Supplier
Short Description: Coil nails also known as Coil Nailer has wide range of nail size (from 2.1mm to 3.3mm) and in different finish (anti-rust, zinc galvanized, hod dipped galvanized), these are available in different materials like Steel, Iron, etc. Steel Nails have Optimum quality, Low maintenance, High output results. These are available in the Length 20mm-130mm. Coil nails widely use in homes, constructions etc.
Short Description: Lock Pin are also known as ball lock pins. Lock Pin have a push button that initiates ball action and retraction. Lock pin design combines the secure fastening with quick release for ease of removal. The diameter of lock pin is between 1/4'' to 5/16''and length Less than 1-3/8'' - More then 2-3/4'', available in Stainless Steel, Steel, Iron, etc. materials. The application of this pin is machine tools, engineering, fixtures construction,etc.
Short Description: A spring pin (also called slotted spring pins or coiled spring pin) is a mechanical fastener that secures the position of 2 or more parts of a machine related to each other. The diameter of spring pin is in range of less than 3/16’’ to more than 5/64’’inches and length is Less than 1/4'' - More than 7/16'' inches, available in stainless steel and steel materials. It use to apply in cosmetics cases, latches as hinge pins, pumps, electrical motors etc. It use to design very precisely.
Short Description: Bow Shackle also known as d Shackle can take loads from many directions without developing as much side load and the larger shape of the loop reduces the overall strength. Also referred to as an anchor shackle, it has a U Shape, available in any size, from 4mm to 32mm, applicable in Industries and Household uses.
Short Description: Core Pins that are highly durable and are also used for various industrial purposes.
Short Description: Screw Nails or screw and nails are a spiral threaded nail that can be driven like a nail but have the holding power of a screw. Having bigger contact surface for higher holding power, provides an easy way of penetration to wood or other hard materials owing to its spiral shanks and sharp points, available in Carbon steel, Stainless steel etc. materials, it’s shank diameter is around 2 to 3 mm or more, having head diameter around 5 to 7 mm and up. Applicable for Constructions, Wood Working etc.
Short Description: Aluminum pin is made by best quality raw materials. Aluminum products that are useful in many industrial applications and these products are available in different sizes.
Short Description: Twist Nails or twist nail are available in Steel, Metal, etc. materials, and have a choice of colors like silver, black, etc. Head diameter ranges 3 to 5 mm or up, shank diameter is between 1 to 3 mm. Applicable with builders metal work like joist hangers and metal straps. These nails offer a more permanent, screw-like grip than plain nails.
Short Description: U Nail are the Nails which are available in different sizes and are widely appreciated for their features like simple design, sturdy construction and low prices, these are available in materials like Iron, Steel, etc. Having shank diameter ranges from 1.5 to 3.5mm or more, it has Fat head, Domed head etc. type of nail head. U Nail is highly used in various fitting applications like Constructions, Home, etc.
Short Description: A punch is a hard metal rod with a shaped tip at one end and a blunt butt end at the other, which is usually struck by a hammer. Most woodworkers prefer to use a ball-peen hammer for using punches. Punches are used to drive objects, such as nails, or to form an impression of the tip on a workpiece.
Short Description: Crank Pin is a cylindrical piece which forms the handle of a crank or to which a connecting rod is attached. In a reciprocating engine, the crankpins, also known as crank journals are the journals of the big end bearings, at the ends of the connecting rods opposite to the pistons.
Short Description: A taper pin is a fastener used in mechanical engineering. They are steel rods with one end having a slightly larger diameter than the other. Taper pins are one of the oldest, simplest pin designs in the fastener industry. They are a solid, cylindrical pin with a constant taper that runs the length of the pin used for either fastening or locating.
Short Description: Spring Dowel Pins are widely appreciated for their features like simple design, sturdy construction and low prices. These spring dowel pins are used for various applications in different industries like automobiles, construction, electronics and electrical works etc.
Short Description: A split pin is a metal fastener with two tines that are bent during installation, similar to a staple or rivet. Typically made of thick wire with a half-circular cross section, split pins come in multiple sizes and types.