HSS Spiral Point Tap

HSS spiral pointing Taps are tools used to create screw threads, which is called threading. A tap is used to cut or form the female portion of the mating pair. Spiral point tap varies in length ranging from less than 40mm-60mm and above.It has a diameter range of 8mm-16mm. The spiral point tap is available in golden and silver colour. The material used in the manufacturing process of the spiral point taps hss, carbide etc..

Send Requirement :


Request a Quote  **Free

No registration, no credit cards required.


Top Brands and Manufacturers

Show All Hide

Manufacturer and Suppliers for HSS Spiral Point Tap


Detailed Description for HSS Spiral Point Tap

About Product:-

HSS spiral point tap cuts a thread on the inside surface of a hole, creating a female surface which functions like a nut. The three taps in the image illustrate the basic types commonly used by most machinists. The tap illustrated in the top of the image has a continuous cutting edge with almost no taper — between 1 and 1.5 threads of taper is typical. This feature enables a bottoming tap to cut threads to the bottom of a blind hole.

                           A tap is usually  to cut threads in a hole that has already been partially threaded using one of the more tapered types of tap; the tapered end ("tap chamfer") of a bottoming tap is too short to successfully start into an unthreaded hole.  they are commonly known as bottoming taps.

 

 

Features:- 

  • Durable
  • Abrasion resistant
  • Affordable 
  • Carbide tips
  • No need to sharp 
  • Hardened & tempered
  • Use ful for  Marble & Granite also 

 

Application:-

It is used in Factories, industries, workshops etc.

 


Question And Answer

Get Prices

Answers to your queries


Buying Tip- See what like buyers had to say!



SUBMIT