Oil Vapour Removal Filter

Oil vapor removal filters designed to reduce oil vapor when industrial applications require compressed air to meet ISO8573-1 Class 0 or Class 1. It works at maximum pressure of 232 psig. The minimum and maximum temperature ranges from 2 to 50. Its maximum flow rate 185 to 1875 (cfm).

Send Requirement :

Request a Quote  **Free

No registration, no credit cards required.

Top Brands and Manufacturers

Show All Hide

Manufacturer and Suppliers for Oil Vapour Removal Filter

Detailed Description for Oil Vapour Removal Filter

 Oil Vapor Removal filters are designed to reduce oil vapor and also overcome the issues of traditional loose filled carbon towers. The loose filled beds of carbon towers offer reduced contact time due to unrestricted air channeling, that is  they are prone to movement of the carbon adsorbent while operation; resulting in degrading performance, attrition of the adsorbent material, blockage of downstream filters and high particulate generation

Manufactured from extruded aluminum, is smaller and lighter than equivalent carbon towers. Compact activated carbon cartridges utilize a unique filling technique to maximize packing density of the adsorbent bed. Retained to prevent movement, 100% of the activated carbon bed is then utilized while operation, guaranteeing performance, dusting, whilst the heavy attrition and blocked particulate filters associated with carbon tower designs is eliminated. The use of cartridges provides trouble free maintenance and reducing system downtime.

Oil free plant air can be affected by many factors such as pressure, air flow, temperature, oil concentration and humidity. The OVR selection process considers all of these factors to ensure consistent outlet air quality for 12 months of continuous operation.



·         Water treatment

·         Clean-up of displacement water

·         Acid flow back

·         Competition fluids

·         Pipeline/systems purge/clean-up hydro test discharge

·         Bilge and ballast water clean-up

·         Run-off surface water





·         Suitable for use with oil lubricated and oil-free compressors.

·         Can be installed in the compressor room for the protection of plant scale, at point of use to protect some applications (or both if old, contaminated piping is in use).

·         Unique adsorbent fill technique.

·         Large capacity bed reduces the number of units required but still gives a compact and light weight design with flexible inlet / outlet connectivity.

·         Simple and easy maintenance.


·         99.9% removal of all oils in a single pass

·         Cartridge block after saturation, so there is no pass of hydrocarbons

·         Removal of strong emulsified in a single pass

·         The absorption capacity is greater than 2 times its own weight (up 8 times)

·         No realized adsorbed hydrocarbons





Question And Answer

Get Prices

Answers to your queries

Buying Tip- See what like buyers had to say!