Milliamp Process Clamp Meter

Milliamp process clamp meters can measure mA signals for PLC and control system analog I/O. It is available in a dimension 59x38x212mm and has a frequency of 0-50hz ; batteries about 1.5V(AAA)x3. It weighs about 410 g, (14.4 oz). It has a storing temperature about -25 to 60 ℃ and operating temperature about -10 to 50 ℃. It is widely used in measuring low-level DC current.

Send Requirement :


Request a Quote  **Free

No registration, no credit cards required.


Top Brands and Manufacturers

Show All Hide

Manufacturer and Suppliers for Milliamp Process Clamp Meter


Detailed Description for Milliamp Process Clamp Meter

Milliamp process clamp meters measure mA signals without breaking loop. This Clamp Meter saves time by making fast, accurate measurements on signal loops without breaking circuit.

 

FEATURES:

 

With 0.2% accuracy

0.01 mA resolution and sensitivity

It measure 4 to 20 mA signal without “breaking the loop”

Measure mA signals for PLC and control system analog I/O

Backlit display with mA measurement and percent of 4 mA to 20 mA span

Measurement Spotlight illuminates hard to see wires in dark enclosures

Detachable clamp has extension cable to measure at difficult locations.

Measure 10 mA to 50 mA signals in older control systems using 99.9 mA range

Automatically changes 4 mA to 20 mA output for remote testing

Power saving features, auto shut down, backlight timeout with extend battery life

Hold function captures and displays changing measurements

Measure 4 mA to 20 mA signals with in-circuit measurement

Simultaneous mA in-circuit measurement with 24 Volts loop power for power and testing transmitters

Source 4 to 20 mA signals for testing control system I/O or I/Ps

mA output linear ramp. 

Automatically change the 4 to 20 mA output for remote testing

DC voltage measurement to verify 24 Volts power supplies..

Source DC voltage to test input devices that accept 0 to 10 Volts signals

Scaled mA output sends continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp

Enables milliamp signal to logging from separate logging device without breaking loop

mA output signal enables a logging DMM or other device to record the 4mA to 20 mA signal without breaking loop

mA in/out simultaneously measures mA signal with clamp and source mA signal

Apply a mA input signal to a device and measures it's 4-20 mA output on devices such as valves or mA isolators

Voltage output is 25% step output

Automatically change the voltage output for remote testing

 

TECHNICAL SPECIFICATIONS:

Diameter of the

 conductor

0.177 inchs or 4.5 mm max

Operating temperature

from -10 to 50 

Storage temperature

from -25 to 60 

Operating humidity

< 90% @ <30, < 75% @ 30 to 55

Operating altitude

from 0 to 2000 m

IP rating

IP 40

Size

44 x 70 x 246 mm 

Weight

410 gms

Vibration

Random 2 gms, 5 to 500 Hz

Shock

1m drop test

EMI/RFI

Meets EN61326-1

For current measurement w/ JAW, 1mA to specification for EMC

field strengths of 1V/m to 3V/m.

Temperature coefficient

0.01% (< 18 or > 28)

Power, battery life

(4) AA 1.5 V Alkaline, 12 hours in mA source to 500 ohms

Warranty

3 years on electronics and
1 year on cable and clamp assembly

Functional Specifications

mA measurement
(measured by clamp)

Resolution / range

from 0 to 20.99 mA

Accuracy

0.2% + 2 counts

Resolution / range

from 21.0mA to 100.0 mA

Accuracy

1% + 5 counts

mA measurement (measured series with test jacks)

Resolution / range

from 0 to 24.00 mA

Accuracy

0.2% + 2 counts

mA source (maximum mA drive: 24 mA into 1,000 ohms)

Resolution / range

from 0 to 24.00 mA

Accuracy

0.2% + 2 counts

mA simulate (maximum voltage 50 Volts dc)

Resolution / range

from 0 to 24.00 mA

Accuracy

0.2% + 2 counts

Voltage source (2 mA maximum  drive current)

Resolution / range

from 0 to 10.00 V DC

Accuracy

0.2% + 2 counts

Voltage measure

Resolution / range

0 to 30.00 V DC

Accuracy

0.2% + 2 counts

 

 


Question And Answer

Get Prices

Answers to your queries


Buying Tip- See what like buyers had to say!



SUBMIT