Wedge Anchors

Wedge Anchors design allows them to anchor attachment into concrete. Concrete wedge anchors work by inserting them into a drill crater into concrete.The materials used are: Steel, Carbon Steel etc... The concrete wedge anchor is then expanded, wedging itself securely in the concrete.

Send Requirement :

Request a Quote  **Free

No registration, no credit cards required.

Top Brands and Manufacturers

Show All Hide

Manufacturer and Suppliers for Wedge Anchors

Detailed Description for Wedge Anchors

About Wedge Anchors

A non bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry. The Wedge all wedge anchor is available in carbon steel with zinc or mechanically galvanized coating.Threaded studs are set by tightening the nut to the specified torque. The Wedge-All is code listed for grout-filled masonry applications.

Key Features

  • One-piece, wrap-around clip ensures uniform holding capacity
  • Threaded end is chamfered for ease of starting nut
  • Available in a wide range of diameters and lengths


  1. Drill a hole in base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed. Drill the hole to the specified embedment depth, and blow it clean using compressed air. (Overhead installations need not be blown clean.) Alternatively, drill the hole deep enough to accommodate the embedment depth and the dust from drilling.
  2. Assemble the anchor with nut and washer so the top of the nut is flush with the top of the anchor. Place the anchor in the fixture, and drive it into the hole until the washer and nut are tight against the fixture.
  3. Tighten to the required installation torque.


Question And Answer

Get Prices

Answers to your queries

Buying Tip- See what like buyers had to say!