Heavy Hex Nuts

Heavy Hex Nuts are smaller faced, are slightly larger and thicker than standard hex nuts. The heavy hex bolts and nuts pattern is typically used for large diameter and high strength bolts.

Send Requirement :

Request a Quote  **Free

No registration, no credit cards required.

Top Brands and Manufacturers

Show All Hide

Manufacturer and Suppliers for Heavy Hex Nuts

Detailed Description for Heavy Hex Nuts

About Heavy Hex Nuts

Available in plain steel, zinc plated or stainless steel in coarse and fine, standard or left hand threads. Made from heat treated low carbon steel. Stocked in sizes from 1/4" to 4".  Designed to be stronger than the bolts with which they are assembled. Therefore, a higher strength nut typically may be substituted in the application and should always possess the same finish as the bolt. Never compromise your assembly with an inferior nut.




4.6/5.6/6.8/8.8 /10.9/12.9


Black oxide,Phosphate,Zinc plated,Back painted,Hot Galvanized or as your requirement


Black,Grey,Red,Gloden,Sliver or as your requirement


u bolt,wheel hub bolt,center bolt,spanner,balance beam pin shaft,nut,steel structure bolt,any of your interesting.


UNC,UNF,Metric thread


1000 PCS

Thread pitch

1.5mm,1.75mm,2.0mm,3.0mm or as your request(right/left threaded)

Question And Answer

Get Prices

Answers to your queries

Buying Tip- See what like buyers had to say!