Impulse Hand Sealer

Impulse Hand Sealers are used to seal ready made bags. Sealer has a round element for cutting and sealing simultaneously. It is called hand sealer because it is operated with hand. Sealer are electric driven instruments and are used to pack plastics , papers. It is used widely in Beverage, Chemical Packing , Apparel etc .

Send Requirement :

Request a Quote  **Free

No registration, no credit cards required.

Top Brands and Manufacturers

Show All Hide

Manufacturer and Suppliers for Impulse Hand Sealer

Detailed Description for Impulse Hand Sealer

Impulse Heat Sealers are designed for the continuous sealing of thermoplastic films such as polyethylene and polypropylene. These sealers operate on the impulse sealing method, controlled by a plug-in transistorized circuit board. They work by delivering an instantaneous high current impulse to a heater ribbon on the device surface.

Coming in a variety of sizes and used for multiple applications, impulse sealers are found in many industries including food packaging, manufacturing, construction, apparel, and the medical community. Because of their ease of use, low energy costs, light weight, exceptional safety standards and consistent reliability, there is a growing demand for impulse heat sealers.

Heating Elements for Impulse Heat Sealers: 
The heating element comes in round or flat. In most sealers, the round and flat wire can be interchanged. The flat wires are used to seal plastic bags or tubing. The round wire is mainly used for cut and seal on shrink bags/film. There is very little seam left. Impulse sealers are available in round wire, 2mm, 3mm, 5mm , 8mm, or 10mm. A wider seals means a better seal so if seal integrity is very important to you, choose a sealer with at least a 5mm wide seal. A good example would be a food application where you need an air tight or liquid tight seal. Round wires are used in cut-and-seal applications such as shrink film, shrink bags and poly tubing. Double impulse sealers are equipped with two heating elements (top and bottom) for faster heat penetration which makes them ideal for sealing thicker materials or gusseted bags. 
Standard Features of our Impulse Heat Sealers: 
Unless otherwise stated, sealers are of metal construction, the body is formed out of a rugged cast aluminum and the pivot is all steel. The sealers are all of industrial quality and built to last. AIE hand and foot sealers are UL listed. 
Most impulse sealers are equipped with plug-in electronic timer and built in micro-switch. No warm-up time is needed. Power is used only when the sealing bar activates the micro-switch. The variable timer let you seal various types and thickness of plastic films. A signal light and beeping sound come on to let the operator know the heat cycle is completed and the seal is done. You want to set the timer to the lowest possible number that gives you a good seal. That will maximize the life of the heating element and the PTFE Non Stick covers. 
The number in the model number usually indicates the size of the sealer in mm; so a 200 is approximately 8" and a 1000 is approximately 40". Divide mm by 25.4 to get its equivalence in inches.

Question And Answer

Get Prices

Answers to your queries

Buying Tip- See what like buyers had to say!