Carbon Threading Tap

The carbon Taps are tools used to create screw threads, which is called threading. A tap is used to cut or form the female portion of the mating pair.

Send Requirement :

Request a Quote  **Free

No registration, no credit cards required.

Top Brands and Manufacturers

Show All Hide

Manufacturer and Suppliers for Carbon Threading Tap

Detailed Description for Carbon Threading Tap

About Product:-

A carbon tap cuts a thread on the inside surface of a hole, creating a female surface which functions like a nut. The three taps in the image illustrate the basic types commonly used by most machinists. The tap illustrated in the top of the image has a continuous cutting edge with almost no taper — between 1 and 1.5 threads of taper is typical. This feature enables a bottoming tap to cut threads to the bottom of a blind hole.

                           A tap is usually  to cut threads in a hole that has already been partially threaded using one of the more tapered types of tap; the tapered end ("tap chamfer") of a bottoming tap is too short to successfully start into an unthreaded hole.  they are commonly known as bottoming taps.




  • Durable
  • Abrasion resistant
  • Affordable 
  • Carbide tips
  • No need to sharp 
  • Hardened & tempered
  • Use ful for  Marble & Granite also 



It is used in Factories, industries, workshops etc..


Question And Answer

Get Prices

Answers to your queries

Buying Tip- See what like buyers had to say!